The Bible, the Cross and the Gospel

Open Bible and cross on a sculpted lectern. Whole 10 cm version; at 20 cm only the base detaches, with a hidden recessed joint beneath the lectern. Print the 20 cm parts on two separate plates without rescaling. Digital STL files for resin printing. Six variants: 10 cm solid, 20 cm solid and 20 cm partially hollowed, each with and without supports. Sculpture height excludes supports. Private use; no physical figurine shipped. Views of the digital model. Import in millimetres at 100%, retain the orientation of supported files and adapt settings to your printer and resin.

Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.

Partially hollow lectern, solid base. Two 6 mm drains beneath the peg: wash, dry and cure the interior before assembly. Nominal clearance 0.3 mm; test gently before gluing. Clip support contacts individually while holding the sculpture; do not pull on pages or the cross.