The Eucharistic Chalice

Chalice adorned with grapes, wheat and a radiant host. Whole sculpture, no assembly, in 10 and 19 cm. The lighter variant hollows only the foot, with two drains beneath the base. Digital STL files for resin printing. Six variants: 10 cm solid, 19 cm solid and 19 cm partially hollowed, each with and without supports. Sculpture height excludes supports. Private use; no physical figurine shipped. Views of the digital model. Import in millimetres at 100%, retain the orientation of supported files and adapt settings to your printer and resin.

Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.

Two 6 mm drains beneath the base. Remove supports before final curing: clip braces, then individual contacts while holding the sculpture. Do not tear away the cage or pull on wheat, grapes or rays. Wash, dry and cure the hollow interior as well.