The Liturgical Ciborium

Ornate decorative ciborium with a whole body and base and a removable fitted lid. Six STL files: solid 10 cm with or without supports; solid or partially hollow 20 cm with or without supports. Heights refer to the assembled object. The 20 cm body and lid require separate print plates. Decorative only, no food contact.

Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.

Two 6 mm drains beneath the base. Remove supports before final curing: clip braces, then individual contacts while holding the sculpture. Do not tear away the cage or pull on grapes, leaves or the cross. Wash, dry and cure the hollow interior as well.