The gift-taming elf

6 STL · 10 and 20 cm · with and without supports
10 cm: solid. 20 cm: solid or partially hollowed. Each variant comes with and without supports. Sculpture heights include the base and exclude supports.

Partial cavity in the lower section: approximately 9.5 ml saved (4.4%), with two 6 mm drain holes. Upper sections remain solid.

Fine supports at both sculpture contact ends. Cut accessible branches gradually while holding fragile details. Geometry and layers checked digitally in ELEGOO SatelLite. Adapt settings to your printer and resin. Clear the openings after removing supports, wash and dry the cavity before final curing.

Included files
Lutin-dompteur-cadeaux-10cm-plein-sans-supports.stl
Lutin-dompteur-cadeaux-10cm-plein-avec-supports.stl
Lutin-dompteur-cadeaux-20cm-plein-sans-supports.stl
Lutin-dompteur-cadeaux-20cm-plein-avec-supports.stl
Lutin-dompteur-cadeaux-20cm-evide-partiel-sans-supports.stl
Lutin-dompteur-cadeaux-20cm-evide-partiel-avec-supports.stl