The chest of wonders

6 STL · 10 and 20 cm · with and without supports
10 cm: solid. 20 cm: solid or partially hollowed. Each variant comes with and without supports. Sculpture heights include the base and exclude supports.

Partial hollowing of the chest body in the 20 cm version saves about 83.8 ml of material (6.1%). Two nominal 6 mm drainage passages open beneath the chest, in the gap above the base. The lid, toys, base and small details remain solid.

Geometry and layers checked digitally in ELEGOO SatelLite. Adapt settings to your printer and resin. Clear the openings after removing supports, wash and dry the cavity before final curing. Cut the branches gradually without pulling on details. Fine contacts are provided. For the 20 cm versions, layers are checked on a half-scale copy sliced at 25 microns, equivalent to a 50-micron vertical step at full size. Delivered STL files retain their 20 cm size. Check their dimensions and reslice using your own printer profile before printing.

Included files
Coffre-merveilles-10cm-plein-sans-supports.stl
Coffre-merveilles-10cm-plein-avec-supports.stl
Coffre-merveilles-20cm-plein-sans-supports.stl
Coffre-merveilles-20cm-plein-avec-supports.stl
Coffre-merveilles-20cm-evide-partiel-sans-supports.stl
Coffre-merveilles-20cm-evide-partiel-avec-supports.stl