Saint Christopher carrying Jesus

Digital STL files for resin printing. Six variants: 10 cm solid, 20 cm solid and 20 cm partially hollowed, each with and without supports. Sculpture height excludes supports. Private use; no physical figurine shipped. Views of the digital model. Import in millimetres at 100%, retain the orientation of supported files and adapt settings to your printer and resin. One-piece sculpture, no assembly. Hollowing is limited to a small lower area and saves about 4% resin; the rest remains solid. Two 6 mm drains under the base. Remove supports gradually, protecting the fingers, the child’s arm, faces and staff.

Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.

6 mm drains beneath each hollow part. Keep the channels clear to clean and dry the interior. Clip contacts gradually; do not pull on fine details.