Saint Michael with a shield

6 STL files · 10 and 20 cm · with and without supports

10 cm: solid, with and without supports. 20 cm: solid and partially hollow, each with and without supports. Two 6 mm drainage channels under the base. Sizes refer to the upright sculpture including its base; table dimensions reflect the supplied orientation and exclude supports.

Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation, especially for the 20 cm praying model. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.

Digital files for private use. No physical item supplied.