Front · 1 / 4
Saint Francis and the wolf of Gubbio
Description and included files
Digital resin-printing files: six STL variants, 10 cm solid, 20 cm solid and 20 cm partially hollow, each with and without supports. The 10 cm scene is one piece. At 20 cm the whole saint and whole wolf detach from the base using four pins and recessed sockets concealed beneath the figures. Eight individual 3MF files let you print parts separately at 100%; do not shrink the combined layout to fit a plate. 20 cm is the assembled height, excluding supports. Only the saint is partly hollow: about 8% less volume for the scene, two 6 mm drains under the robe; wolf and base remain solid. Clean, dry and cure the interior before assembly. Fit the wolf vertically first, then insert the saint along the inclined pins. Dry-fit before gluing. Clip fine contacts gradually without pulling on fingers or paws. Digital checks only. Adjust exposure to your resin. Private use; no physical figurine shipped.
Buy without a mandatory account. Receive your files and invoice by email.
Digital files only. No physical figurines are shipped.
Digital render of the workshop’s 3D model. This is not a photograph of a physical print.
Digital download · no physical figurine shipped.
Buy without a mandatory account After confirmed payment: download and a private link by email.
Card payment through Stripe · personal use only.
Sales to individuals in the European Union, excluding special tax territories. Terms of sale (FR)Files for this model
6 STL files · 10 and 20 cm · with and without supportsZIP · 524 MB
| Collection | Actual dimensions W × D × H (mm) |
|---|---|
| 10 cm | 89.73 × 80.25 × 100 |
| 20 cm | 179.46 × 160.5 × 200 |
Digital resin-printing files: six STL variants, 10 cm solid, 20 cm solid and 20 cm partially hollow, each with and without supports. The 10 cm scene is one piece. At 20 cm the whole saint and whole wolf detach from the base using four pins and recessed sockets concealed beneath the figures. Eight individual 3MF files let you print parts separately at 100%; do not shrink the combined layout to fit a plate. 20 cm is the assembled height, excluding supports. Only the saint is partly hollow: about 8% less volume for the scene, two 6 mm drains under the robe; wolf and base remain solid. Clean, dry and cure the interior before assembly. Fit the wolf vertically first, then insert the saint along the inclined pins. Dry-fit before gluing. Clip fine contacts gradually without pulling on fingers or paws. Digital checks only. Adjust exposure to your resin. Private use; no physical figurine shipped.
Digitally checked in Elegoo SatelLite. Import in millimetres at 100%. Keep the supplied orientation. Do not automatically add supports to presupported files. Adapt settings to your resin, inspect layers and keep drains clear to wash, dry and cure the interior. Remove supports gradually with small cutters while holding the piece near each contact.
Story and representation
Catholic tradition · artistic interpretation
An artistic representation of Christian heritage. The pose and sculpted details are the workshop’s interpretation.
Report an error on this pageAll downloaded files are for private, personal use only. Reselling, sharing or redistributing the files, or selling objects printed from them, is prohibited.
Generated with Hitem3D · Model revised by the workshop